[Thinkpad] A20M New system board

[Bruce Markowitz]

That was done for warranty purposes. It will work fine with the old numbers
or no numbers
----- Original Message ----- 
From: "Glen Tophen" <tophen at rogers.com>
To: <Thinkpad at stderr.org>
Sent: Monday, April 02, 2007 12:15 PM
Subject: [Thinkpad] A20M New system board


> Through a series of misadventures, the polarity was reversed to my A20M,
and subsequently it no longer functions.(Works off of the battery, but not
external power) I have determined that I need to replace the system board,
which should not be a problem. In my research into this,tho', I have come
across references to the UUID or recording S/N's to the EEPROM on the new
board. Is this mandatory, and if so, am I SOL because I cannot access the
SN's from the old system board?
>     Also, may I have some opinion as to the neccessity of using new screws
in the assembly.?
> Thanks,Glen
> _______________________________________________
> Thinkpad mailing list
> Thinkpad at stderr.org
> http://stderr.org/cgi-bin/mailman/listinfo/thinkpad